Synchrony Financing Program

We engineered Áspero for pure, unapologetic speed, ready to take down finish lines, KOMs, PRs, and FKTs. A bike built without limits, for the riders looking to test them. It's stiff-Classics-racing stiff and performs like you'd want a road bike to perform off-road. We think that makes sense, and it's what we were trying to do when we were stuffing bigger tires into our existing frames and swapping in aftermarket forks to get a 40mm tire up front. - Multiple Configurations We designed Aspero with clearance for up to 700c x 40mm tires or 650b x 49mm tires. Of course, there are variables—rim width, tire casing, and tread depth—which will affect final clearance. We always recommend 4mm of clearance between the tire and frame. **New Shimano road (not gravel) 12-speed front derailleurs reduce tire clearance in the rear of the frame to 700 x 38c or 650b x 45c. - Two Position Adjustment Trail—front-wheel response to rider input—is the most critical factor in high-velocity handling. Flipping the two-position "Trail Mixer" to compensate for the difference in circumference between a 650b and 700c tire maintains consistent handling by maintaining consistent trail figures. - Balanced Handling Stiffness and handling work together to ensure the bike tracks predictably and responds immediately to critical pedal and bracing inputs.

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake, and dropper post housing - 154 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Dominate the boards with Felt's TK2. This track-specific rocket is purpose built to give you the edge from a points race to the pursuit. Its custom-butted aluminum Felt frame is super stiff to get you up to speed in a hurry and nicely appointed with aero detailing to keep you there with less effort. Its track-specific TruVativ Omnium crankset and 48x15 gearing keep your confidence high as you blaze through banked corners. And, Mavic's wheels with Challenge tires shave resistance to keep your competition gasping to hold your wheel. A Felt TkR handlebar, 3T stem, and Prologo saddle provide a fast, stable platform for all your velodrome exploits.

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 144 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Specifically designed for the Swiss National Track Team and sporting a record that includes a World Championship title, it's clear that the Trackmachine is the weapon of choice for the velodrome. VMAX TECHNOLOGY - P2P x SubA: The formula for high-performance cycling – Position-to-Perform maximizes the adjustability of your riding position while SubA innovation creates an incredibly fast frame profile. Do the math! ADJUSTABLE DROPOUTS - Replaceable and adjustable full-stainless steel dropouts.

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 134 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Rangefinder is Salsa's confidence-building trail hardtail. Built for riders who want to start discovering their local trail systems, Rangefinder offers geometry and spec designed for the perfect introduction to mountain biking. Rangefinder opens up singletrack and doubletrack adventures and offers provisions for bikepacking setups so riders can expand their off-road repertoires. Rangefinder is mountain biking for the masses. - 6061-T6 alloy frame - Internally-routed shift, brake and dropper post housing - 139 mm suspension fork and dropper post - 1x drivetrain keeps shifting simple with plenty of gear range - Hydraulic brakes offer confident stopping power - Compatible with 29" or 27.5 plus wheels and tires - Carry what you need with the integrated top tube bag mount, two bottle cage mounts in the frame on M, L, and XL sizes, one accessory mount under the down tube, and rear rack mounts

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

An elegant piece of craftsmanship, the Valac is built with a longer 20.75" top tube, 76-degree headtube angle, and a taller 9" bar, making it the perfect ride for the rider who's progressing to a bigger and better bike. With geometry taken from our aftermarket range and a set of wider Saltplus Burn tires, the Valac rides just like the bikes that the pro teams use. With fully sealed bearings throughout and a Salt Zion mid-load stem, the Valac is an eye-catching and dialed bike, built to shred it all.

The cruiser that helped start the big bike craze! The Saint has a proven geometry, armored with 100% chromoly tubes in its frame, fork & bar, all sealed bearings & Mob cranks make this bike hard to beat!

Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura. - Alloy clamp for mounting your own device on handlebar or stem - Lightweight and rustproof aluminum construction - Hex wrench required for instillation and removal - Clamp body has (1) M5 Thread hold in center - 22.2 mm-28.6 mm diameter range

Based on the same bikes that We The People pro, Felix Prangenberg, rode last season, the Justice features revised geometry and a never before seen parts overhaul from We The People. Our new Activate tire, Paragon plastic guard sprocket, and Perfect grips make this new-school urban machine more stacked than ever before. Paired up with a shorter 22mm-offset fork and a full assortment of plastic hub guards, you'd be forgiven for thinking that you're riding a full custom build.

You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory. - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience - Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for use and fold for storage and travel - Maintenance-free resistance unit and roller bearings - 3-Year Warranty

The heart of a light and versatile expedition bike, and the endpoint of our Hook platform. This titanium version retains the vigor of our hooligan tourer and distills it into a light and comfortable frame. Able to accommodate multiple-wheel sizes, along with myriad luggage configurations, it’s ready to be the centerpiece in any number of different builds. Paired with our light yet staunch full-carbon EXT V2 fork, this provides triple cage mounts, along with steadfast handling in rough conditions. HIGHLIGHTS: - Titanium 3Al-2.5V frame with T47 BB shell fender mounts and through axles. - Full carbon tapered fork with internal light cable routing, through axles and triple cage mounts. - Sram UDH derailleur hanger. - Toptube bag direct mounts, triple cage mounts on downtube and seattube for optimized bottle position, bottle cage mounts underneath the downtube, and rear rack mounts. - CNC yoke for maximum tire and chainring clearance. - Ovalized toptube for supreme steering precision and comfort. - Biaxially ovalized downtube for optimized power transfer and steering precision. - Front derailleur compatible. - 12 mm through axles front and rear.

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

Riding bikes is all about getting outside, feeling strong, and reveling in confidence to keep the workout going. We know that curvy road bike handlebars don't fit everyone's lifestyle, so we developed our line of Verza Speed bikes accordingly. They're perfect for jetting around on two wheels for a workout, errand, or a commute to work, and they integrate flawlessly into daily routines, all with a focus on fun. Verza Speed 50 Mid-Step Mid-step version of the Verza Speed 50, meaning it has a stepover frame design that makes mounting and dismounting easier than ever. - 8-speed drivetrain with triple crankset - Shimano groupset for crisp shifting - Classic-style rim brakes

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

With its sweeping curves, the Pure City Step-Through has the classic look of a cobblestone street with a smooth modern feel. Whether you're headed uptown, downtown, or just around the corner, if you're on this bike, you'll always be taking the scenic route! Speeds to meet your needs We designed these bikes to thrive in whatever city you call home. Because not every city is created equally, we built two different gearing options so you can pick that set-up that's right for you. The 3-speed gives you a small range of gears to cycle through and the internal hub is unmatched for ease of use and creating a clean, minimalist look. The 8-speed gives you a wider range of gears to tackle tough hills and haul heavier loads. - Wider range of gears for taming hilly cities or hauling heavy loads. - Higher top speed before "spinning out". - Cheaper to own, repair, and replace.

A new frame with distinctive, aggressive lines with aerodynamic details typical of the Pinarello DNA, here is GREVIL +. Designed and made to devour miles on every terrain GREVIL + maintains the handling Pinarello but makes versatility its strength. With GREVIL + you can go EVERYWHERE thanks to the use of different wheels able to radically change its nature. With classic wheels from 700c to 25mm it is fast and powerful on the asphalt. “Dressed” with 42mm tires, fly on dirt roads or muddy meadows. But if we want to go even further, using 650b wheels with different tires up to 2.1 "GREVIL + will have no more limits. We are therefore faced with a versatile and powerful bicycle, able to satisfy an extremely vast and demanding public. GREVIL + is made of Torayca T1100G Carbon 1K Dream Carbon with Nanoalloy Technology. The GREVIL + frame contains the maximum expression of Pinarello know-how. The design of the rear stays allows a wheel passage of up to 650bx2.1 "or 700x42mm. A perfect mix of asymmetry and reactivity capable of absorbing vibrations to ensure maximum comfort in long on and off-road rides. Concave downtube improves aerodynamics. E-Link integration for Shimano Di2. Front fork with increased flap to protect the disc and aerodynamic optimization.

For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%