Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible
SRAM's X7 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. Plus, this beauty is built to last so you can enjoy the trails for years to come.
The RD-M9210 XTR rear derailleur is intended for use with 2x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Add bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Cassette size: 10-45t - Total capacity: 41t
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
Shimano Deore XT RD-M8050 Di2 Rear Derailleur - Accurate and stable shifting in any condition - Instant response - Customized shift speed within Multi-shift - Powerful shifting - Seamless gear change even under high load - Smart and efficient gear selection with Shimano Synchro Shift - Single lever operation - Rider-programmable shift mapping - Drivetrain Speeds: 11 - Maximum Sprocket: 42T(2x11-speed)/46T(1x11-speed) - Minimum Sprocket: 11T - Front Difference: 10T - Total Capacity: 35T - Average Weight: 320 grams
Shimano's Saint Rear Derailleur is packed with World Cup-worthy features, like an integrated skid plate, a urethane bump stop, and low-profile Shadow positioning, all of which protect your derailleur as you smash through rock gardens and overgrown singletrack. Shimano Plus Technology minimizes chain and impact noise, and maintains perfect chain tension so you can shift with precision and authority no matter how rough the terrain gets. The Saint Rear Derailleur also has a mode converter that lets you use either a close-ratio DH cassette, or a wider-ratio freeride cassette.
Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t
$31.99 - $40.00
Shimano's Claris rear derailleur is a perfect replacement part or upgrade for 8-speed road drivetrains. HyperGlide technology results in smoother, faster shifting. - Maximum cog size: 32t (SS) / 34t (GS) - Total capacity: 37t (SS) / 43t (GS) - Pulleys: 11t - Chain compatibility: HG 8-speed
$52.99 - $70.00
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
$291.00 - $295.00
It takes a degree of passion for the sport that can’t be faked to fully appreciate SRAM RED. It was created to blur the boundaries between machine and athlete. The SRAM RED rear derailleur was designed with Exact Actuation technology for precise, efficient shifting. Carbon fiber, titanium, and ceramic bearings complete the spec. The result adds to its legacy as the heart of the purest groupset for the pursuit of cycling excellence. - SRAM 11-speed compatible - WiFLi option - Carbon cages, carbon inner links, titanium hardware - Exact Actuation shifting provides fast and accurate shifts - Silent shifting with optimized AeroGlide pulleys, ceramic bearings - Spring-fixed barrel adjuster - Chain pulley cage adds precise chain management - Titanium pinch bolt keeps a low profile while minimizing weight - Speeds: 11 - Material: Carbon cages, Carbon inner links, Aero designed titanium hardware - Weight: 145 grams short cage), 165 grams (mid cage) - Compatibility: SRAM RED & Force Rear Shift-Brake levers, SRAM R2C Aero SL-1190 shifters, - SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Finish: Falcon grey & black anodized - Tech Highlights: AeroGlide Pulleys, Exact Actuation - Largest Cog (teeth): 28 (short cage) 32 (WiFli Medium Cage)
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. These Mezzo rear derailleurs are light, robust, and reliable. You can count on them to get any bike on the road. - Weight-saving aluminum bracket body and outer link - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
$89.99 - $124.00
Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.
From top-tier XC racing to punishing enduro stages, Shimano defines the rear derailleur with their XTR Shadow Plus 11-speed model. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated and dropped chains are practically a thing of the past. And of course, it retains XTR's legendary smoothness, light action and super precise shifting. The medium-cage design matches perfectly with XTR's double and single ring cranks and 11-speed cassette, offering a crisp, defined gear range.
From top-tier XC racing to punishing endurance stages, Shimano defines the rear derailleur with their XTR Shadow Plus 11-speed model. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated and dropped chains are practically a thing of the past. And of course, it retains XTR's legendary smoothness, light action and super precise shifting. The long-cage design matches perfectly with XTR's new triple cranks and 11-speed cassette, offering Shimano's mega-wide gear range.
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs
With SRAM's WiFLi RED Rear Derailleur, SRAM set out to make their already race-proven design faster, quieter, and able to accommodate a full 11-32 cassette for a huge gear range. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Fast, quiet, and capable, the RED derailleur delivers!
Shimano's unbelievable Di2 technology has made the leap to the trails with their XTR Di2 drivetrain. This rear derailleur features all of the race-day performance you've come to expect from XTR, and the unrivaled stability, speed, and performance of an electronic drivetrain. Since there aren't any cables to stretch or housing to create friction, shift performance stays amazingly perfect, delivering flawless shifts any time, under any condition. System communication with the front derailleur eliminates chain rub and, if you prefer, the rear derailleur can be optimized to use Shimano's Synchronized Shift technology.
- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
$249.99 - $360.00
Shimano's electric-shifting 11-speed Ultegra Di2 Rear Derailleur is driven by battery power and a servo motor, so shifts are fast, precise, and perfect every time. It's made of light, tough cold-forged aluminum while mid-cage and short-cage models give you your choice of cassette. Since there aren't any cables or housing to stretch or fail, maintenance is dramatically reduced and shifting accuracy is unprecedented. This high-tech derailleur is even designed to move inward under impact to reduce the potential for damage in a crash.
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 2 x 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 2 x 12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 45 teeth - Largest Cog: 45 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
Page 1 of 2 Next page