The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$40.00 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
The Kinetic Control Power Unit installs in minutes and is the most affordable and convenient option for upgrading any Kinetic Rock and Roll or Road Machine trainer frame to our most advanced, interactive, app-controlled power training experience. It's part of our newest generation of interactive, app-controlled trainers offering the best power training workouts available, and features ANT+ FE-C and Bluetooth FTMS compatibility along with a more accurate and responsive ride. A massive 12-pound flywheel provides a realistic road feel with interactive, automatically-controlled resistance, super-quiet operation, and accurate and reproducible data. It works with apps like Kinetic Fit, Zwift, TrainerRoad, Rouvy, Kinomap, The Sufferfest, FulGaz and more. - Includes a free 6-month subscription for the Kinetic Fit power-training app - Works with Kinetic Fit, Zwift, and TrainerRoad on Bluetooth-connected smartphones, tablets, and laptops - Controlled resistance to simulate terrain changes in workouts and on virtual courses - Pairs with devices using Bluetooth Smart - Max slope: 10% - Max resistance: 1800 watts at 30mph - ±3% accuracy - Retrofits older Kinetic trainer frames - Easy to assemble - Unconditional one-year warranty on Power Unit
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.
The Booster is the most powerful basic trainer and can generate high resistance at low speeds. If you set the handlebar resistance lever to a high position you have to exert a lot of force while advancing slowly, just like when you tackle a steep climb. This makes the Booster highly suitable for power based workouts. Manual Resistance Control The Booster is controlled by a lever on your steer, allowing you to set the resistance as required. The higher the position, the more resistance. 1050W power, 10 positions. Silence Boost The Booster is the only basic trainer with a closed resistance unit, highly reducing noise. Intervals & Power Workouts The powerful magnetic brake of the Booster enables intense interval sessions and power based workouts. Realistic Pedal Stroke The Booster features an actual flywheel which generates a realistic road feel. Stable & Robust 675mmx650mm footprint Multifunctional Front Wheel Support The Skyliner is a front wheel support that raises the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer. Click 'n Ride The bike is fixed in the trainer easily by two simple clicks. Unique Dual Material Roller The roll that places the resistance on your rear wheel is made from two materials: a hardened steel sleeve with a soft core of elsastogel. The steel sleeve prevents wear of the trainer, while the elastogel absorbs vibrations to reduce noise. Virtual Power Train with the Tacx Training app, Tacx Cycling app, Zwift or TrainerRoad on the basis of virtual power using the Tacx speed and cadence sensor! This transmits your speed and cadence wirelessly via ANT+ or Bluetooth Smart to your tablet or smartphone, so you can also use these popular training applications with a basic trainer. FEATURES Type of trainer: Basic trainer with magnetic brake Magnets: 2x8 Permanent ferrite magnets Transmission: Roller, 30 mm Electrical requirements: No mains voltage required Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: No Suitable bikes: Race, Tri & MTB , if necessary with axle skewer Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power: (40 km/h) 1050 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 17 Nm Max. brake force: 50 N Flywheel: Actual of 1,6 kg Mass inertia: 9.18 kg (20.2 lbs) Calibration: n.a. Footprint: (lxw) 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 8.53 kg (18.8 lbs) Article number: T2500 DATA OUTPUT AND CONTROL Wireless communication: None Control by: Handlebar resistance lever with 10 positions
Page 1 of 1