Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Guide RE is SRAM's optimized braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. The Guide RE provides real, usable on-trail control—optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. - Guide R lever assembly with proven Guide technologies - Powerful 4 piston caliper derived from the Code gravity specific brakes - Sintered pads for better pad life in intensive use - MatchMaker X compatible - Ambidextrous lever mount - Tool-free reach adjust - Weight: 415 grams (based on direct mount, 800 hose, 160mm CL Rotor) - Lever Material: Aluminum - Caliper Design: 4 piston caliper derived from the Code gravity specific brakes - Finish: Gloss black - Pad: Steel-backed metal sintered - Fluid: DOT 5.1 - Mount: Ambidextrous - Adjustment: Tool-free Reach Adjust, Banjo Adjust - Pivot: Bushing

- Cold forged, CNC-machined cartridge body with self-aligning pivoting posts - Triple-compound 70mm pads

- Melt forged aluminum construction - Coiled spring tension adjust

Box One Genius brake levers are the first ever to incorporate a clamp for ODI Lock-On grips. This ensures that your grips stay put while eliminating the need for an extra clamp. At roughly 50 grams, these cold-forged and CNC-machined levers beat any other on the market. Genius levers have a built-in return spring and are fully compatible with carbon handlebars. The Mid reach lever features a new design that puts it in the same reach position as the Long, but with a more BMX-specific blade for better one-finger leverage. Other features include adjustable reach, a titanium mounting bolt, and stainless steel hardware. Genius levers are designed to work with linear-pull brakes. They are excellent for BMX, mountain, city, urban, and tandem flat-bar bicycles.

- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors. Features: - Rim friendly compounds - Threaded steel post - Steel hardware Specifications: - Weight per pair: 56.9 grams - Overall length: 46.1mm - Pad contact width: 13.1mm

With copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Our pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

Maximum performance, steep slopes, and high speeds are manageable and attainable only when armed with total safety and confidence in powerful, modulable braking. The new Super Record brakes ensure the shortest braking distance and continuous total control of the braking power transmitted thanks to the new Super Record shifting system and Campagnolo's proven experience in brake block compounds. Campagnolo developed the Dual Pivot fulcrum system because the Super Record users demand exceptional braking performance. The titanium screws also enable you to reach a level of weight and aesthetic impact on par with Super Record standards.

Shimano BL-R780 Road Brake Levers For Flat Handlebars. Compatible with V-brake, canti brake, mechanical disc brake. - Adjustable for Short or Long Cable Pull. - Integrated design with SL Compact and easy maintenance. - Better brake control performance/function with Dura Ace, ULTEGRA, 105 caliper brake (New brake interchangeability) - New Super SLR: enhanced brake arch pivot location for quick linear response More brake choices. - Cable Pull: long pull, short pull (Adjustable)

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

We know good value. It comes with practicality. Durability. Sensible design. The Level TLM is that sweet spot—alloy lever blades, DirectLink actuation, DOT 5.1 fluid, and our new two-piston, two-piece caliper—all in a compact, lightweight package. This is the tried-and-true machinery for all-day, never quit performance. - A modern XC brake for the most demanding rides and races - Approachable price for bikes and riders of all levels

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Increased Overall Braking Performance - Integrated Sleek Low-Profile Caliper Design - Comfortable Riding With Wider Tire On Rough Road - Better Clearance With Wider Tire - Compatible With 28C Tire Size - Intuitive Braking Control - Smooth And Light Operation - SLR-EV Technology

Shimano Ultegra R8070 flat mount hydraulic disc brake caliper. - Model Number: BR-R8070 - Brake Type: Hydraulic disc brake - Average Weight: 280 g/pair - Greater rider control in all conditions - Hydraulic disc brake provides the next stage of control - Sleek integration into a road bike's aero profile - Designed to integrate seamlessly with a road bike's profile - Flat mount hydraulic type - Better heat dispersion than current road disc systems (SM-RT800) - New construction provides better heat management than current ICE TECHNOLOGIES FREEZA

Shimano 105 BR-R7070 Ice Tech Disc Brake Caliper Flat Mount Utilizing Shimano’s lightweight and sleek flat mount design, the BR-R7070 hydraulic disc brake caliper features premium stopping power and aerodynamics for road applications. The new SM-RT70 rotor offers Ice Technologies construction for excellent heat management for confident performance on the longest descents. - Increased rider control in all conditions - Sleek Flat Mount design integrates seamlessly into a road bike’s aero profile - Ceramic pistons - Recommended brake lever: ST-R7020, ST-R7025 - Recommended rotor: SM-RT70 - Caliper fixing bolt (4 mm) made of steel - Application: Cyclocross, Gravel, Road - Brake Type: hydraulic, 2 pistons - Hydraulic Fluid: mineral oil - Hose: SM-BH90 (not included)

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Shimano disc brakes.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.