Write a Review

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Bottom brackets have some of the highest torque specs of any component found on a bicycle. Despite this, some bottom bracket cups feature tool fittings that allow mere millimeters of engagement, which can be a problem when attempting removal or installation. Solution: the Park Tool Bottom Bracket Tool Retaining System. Used in conjunction with nearly any Park Tool bottom bracket tool, the BBT-RS uses a spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. The BBT-RS can be configured for use with the vast majority of threaded and thread-together bottom bracket standards. The BBT-RS features an M8 threaded rod and a double-sided adapter nut with M12 and M15 threads, allowing it to thread directly into any compatible cartridge bottom bracket. The M15 adapter can also be used to install any of Park Tool's nine aluminum bottom bracket tools, all of which feature integrated threading for use with the BBT-RS. - Washer diameter: 57 mm (2.25") - Rod length: 175 mm (6.9") - Rod threading: M8 x 1.0 - Adapter nut threading: M12 x 1.0 & M15 x 1.0 Compatible with the following bottom bracket styles: - Threaded cup - Thread-together - Cartridge - Cup-and-cone Compatible with the following bottom bracket tools: - The following Park Tool socket-style aluminum bottom bracket tools: - BBT-27.3 - BBT-35-12 - BBT-35-36 - BBT-47-12 - BBT-47-16 - BBT-49.3 - BBT-59.3 - BBT-69.3 - BBT-79.3 - Wrench-style bottom bracket tools with a handle (e.g. Park Tool BBT-9, BBT-29, HCW-4) - Bottom bracket tools with external wrench flats (e.g. Park Tool BBT-19.2, BBT-22)

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use, and applies up to 60 Nm of torque to any fastener or component with left or right-handed threads. Perfect for mid-to-high-torque applications such as bottom brackets, cassette lockrings, and crank bolts. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet, as well as most threaded bottom bracket tools. - 0 to 60 Newton meter (0 to 50 foot-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 17.75" (450 mm)

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.

High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Hexagonal ball point screwdriver - Multi-component Kraftform handle for fast and ergonomic screwdriving - "Take-it-easy" tool finder: color coding according to profile and size - Hexagonal blade and ballpoint for secure working even in difficult installation situations - The Wera Black Point tip offers an exact fit and optimum corrosion protection

If you are looking for the absolutely strongest, most bad-ass tire lever, perfect for the toughest downhill and freeride tires, you've come to the right place. Pedro's downhill tire lever features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8") length for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and rims, and an ergonomic dual density screw driver style handle providing comfort and security. - Heat-treated tool steel construction for unmatched strength - 275mm length for incredible leverage on tough downhill and freeride tires - Large shovel tip holds tight on bead while smooth finish protects tire and rim - Ergonomic handle provides comfort and security

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

- Highly concentrated. Activate with water for incredible results or dilute for lighter degreasing tasks. - Engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and finally dissolve and contain to carry it all away. - Safe on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC. Degreaser 13 is a highly concentrated degreaser engineered for use with water to tackle tough degreasing tasks. Developed from scratch, specifically for the challenges of bicycle drivetrain degreasing, the advanced formula is engineered to fight its way to metal surfaces and stay there, then attack and break free the bonds holding oils, soils, and grime in place, and work together with water to dissolve and contain to carry it all away. Activate with water for incredible results on tough jobs or dilute for lighter degreasing tasks. Fully water soluble and further activated by scrubbing, agitation, and rinsing, the result is a spotless residue-free drivetrain. The advanced formula is also safe to use on any material, fully biodegradable, solvent-free, plant-derived, and zero-VOC.

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

TB-1938: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125" inserts for installing the crown race, used on most 1" x 1.125" headsets TB-1939: Crown race setting system includes 1 x setting tube, 3 x 1" inserts and 3 x 1.125

Designed and built with the specific needs of the bike mechanic in mind. The RP-SET.2 includes five professional quality pliers for internal snap rings and one for external snap rings. Pliers are made from forged, heat treated cro-moly steel with a return spring and vinyl dipped grips. RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) RP-2: 1.3mm bent internal. Opens from 22mm down to 2mm (center to center) RP-3: 1.3mm bent external. Opens from 2mm (center to center) up to 18mm RP-4: 1.7mm bent internal. Opens from 21mm down to 2mm (center to center) RP-5: 1.7mm straight internal; Opens from 25mm down to 0 (tips touching)

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

- Goes on wet to penetrate rollers and side plates, then sets up to a soft, pliable wax - Chain is encased in a waterproof layer, shielded from dirt and grime - Special low melt point wax replenishes drivetrain by slow-Feeding clean lube from the inside layers outward, significantly reducing abrasive wear and eliminating corrosion - Smooth, quiet, trouble-free operation in all conditions for long lasting protection

- Bit socket with 3/8 inch drive and holding function. - "Take it easy" Tool Finder with color coding according to size

Material: premium chrome vanadium steel

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

- Awl with round straight blade - Awl with round, 90° bent blade - Awl with round, double bent blade - Awl with round, double bent small blade

- Also for clenching and separating of from cables and other sensitive objects - Serrated gripping surface - Cutting edges induction hardened

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-10 is a 10mm x 1mm thread, the same thread for the derailleur hanger.

WD-40 Dry Lube is the perfect chain and component lubrication for dry and arid riding conditions. Extensively tested by scientists and pro mechanics alike, it keeps your bicycle shifting like a dream and pedaling smoothly. It boasts special polymers that form a dry film to protect your chain and repel dirt in dry conditions. The result is a clean, quiet, perfectly functioning and long-lasting drivetrain.

A proprietary ceramic formulation containing integral Boron Nitride compounds for low friction in dry and dusty conditions. Formulated with our unique eBike specific lubricity pack to handle the higher-torque loads of an eBike drivetrain. Ideal for chains, cables, shifters, derailleurs & pedals. - Creates a dry ceramic coating for increased durability and dry condition performance - Contains Boron Nitride compounds - Ceramic compounds provide ultra-low friction for unparalleled lubrication - Non-dust attracting - excels in dry and dusty conditions - Utilizes biodegradable organic compounds - Ideal for road and off-road