$6.00 - $7.20
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!
Lower mount kit for all Salsa's Alternator Racks (sold separately)
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm
Mount struts to your heart's content with Salsa's 8mm Strut Mount kit.
Salsa's EXP Series Anything Cradle system is designed to create carrying capacity in front of your handlebars, while providing ample room for cables without fear of kinking them. This system is available as a complete "kit", or sold individually for custom set-ups. - Anything Cradle Straps are the perfect width for the Anything Cradle - Can also be used to strap stuff down on racks or wherever else is needed - They cinch tight but easily release tension with a push of the buckle - Extremely versatile - 25mm nylon webbing, Duraflex hardware
Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts
Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!
Mudgard Bracket for Rear Carriers
Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
QR Axle Adapter with a set of adapter plates and mounting parts for assembling a rear carrier to frames without eyelets.
This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes. - Weight: 66g - NOTE: This item is not compatible with any “EVO” Tubus racks
Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.
Thule's Pack 'n Pedal Rail Extender Kit increases rider heel clearance by moving your panniers further back. The extenders can be used on either a front- or rear-mounted Thule Tour Rack (sold separately).
Accessory to attach Thule Pack ’n Pedal pannier magnet onto virtually any other bike rack. • Attach the Thule magnet to the adapter bracket (sold separately) for attachment to virtually any type of bike rack. • Versatile design allows for a variety of attachment options.
Replacement or extra magnet for Thule Pack ’n Pedal panniers. • Rare earth magnet that secures lower part of Thule Pack ’n Pedal panniers. • Part of patent pending “vanishing hardware” attachment solution for Thule Pack ’n Pedal Panniers. • Works with all Thule Pack ’n Pedal Panniers.
Dual clamps provide a secure fit to most bicycle handlebars (31.8mm, 26.0mm and 25.4mm) - Accessories snap in and out in seconds - Quick and easy installation - Compatible with all Thule handlebar bags and accessories - Mounts facing the rider or facing forward
This awesome bicycle basket liner is the ultimate cruiser bike accessory. This original bike basket liner is all-weather friendly, reversible, and crafted in nylon rip-stop material with durable and sturdy draw straps to convert easily into a generously-sized market bag, gym bag, yoga bag, beach bag, or tote bag! Featuring two deep pockets (water bottle size). Also folds up easily into a compatible zippered pouch. Easy to take in and out of bike basket. - Fits all standard wire and wicker baskets - 15 x 10 x 10-inches - Water resistant and fade resistant - Converts easily into versatile, stylish, adorable everything bag - Available in many different styles - Basket sold separately
Keeping with the stealth ethos of the Ninja series, the Ninja Pouch+ Road conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike. Easy access to the integrated tire levers makes changing a tube a quick proposition. - Material: Cage-Engineering grade plastic; Bag-EVA foam - Cage Outer Diameter: Fits standard water bottle - Tire Levers: 2 engineering grade plastic levers - Compatibility: Up to 700 x 25c inner tube - Size: 18.5 x 10.8 x 7.8 cm / 7.3” x 4.3” x 3.1” - Weight: 101 grams - Inner tube not included
The perfect partner with Ninja P, the Ninja Pouch Road easily mounts to your bike with most water bottle cages to match the aesthetics that best suit you. It conveniently holds a spare tube (up to 700 x 25c) in an inconspicuous area keeping the clean lines of your bike, but ready for action when you need it most. - Material: Aluminum / Engineering grade plastic / EVA foam - Added Feature: Able to remove the pouch section to assemble w/ Ninja - Cage - Compatibility: Up to 700 x 25c inner tube - Weight: 65 grams - Size: 16 x 10.6 x 6.8 cm / 6.3” x 4.2” x 2.7”
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars
Topeak handlebar bag fixer for eBikes with display units.
Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
Page 1 of 2 Next page